Need Help?
ANTHEM CLASSIC
If you have questions or concerns, contact us directly. We're here to help:
What's Included:
- Aluminum French Cleat(s) (sized for your piece)
- Black stud screws
- Drywall Inserts
- Steel drywall insert screws
Made in America, Always.
Step by Step:
-
Find Your Studs
Use a studfinder and mark at least two points that align with the width of your French Cleat. But use drywall inserts if studs are not available.
-
Position French Cleat
Hold the French Cleat horizontally with the flat side against the wall and the open channel facing out. The screw holes should be on the lower side.
-
Adjust and Level
Use a level to fine-tune.
-
Drill and Install French Cleat
Drill pilot holes into the studs and secure the French Cleat using the included screws. Avoid using drywall anchors unless necessary.
-
Inspect
Make sure the cleat is securely fastened to the wall.
-
Hang Your Artwork
With the help of a friend, lift your metal artwork and hook the top rear lip into the mounted French Cleat until it sits firmly.
Care & Cleaning
Use a dry microfiber cloth to remove dust. For build up, lightly dampen the cloth with water—no chemicals or abrasives. Do not scrub patina finishes—the surface is meant to evolve naturally overtime.
Contact Us
